The VERSATECH V-100N 5-axis double-column machining center is designed to provide unsurpassed productivity in the machining of very large workpieces thanks to its spindle head that can position to the vertical and horizontal positions and any angle in between.
The machining time for cast iron and non-ferrous material workpieces can be considerably reduced thanks to the machine's fast cutting feedrates and spindle speeds.
Additionally, since multiple-surface machining can be realized by just changing the position of the spindle head by program command, non-cutting time is considerably reduced.
- 6,000, 10,000 and 12,000 rpm spindles available
- Multi-face vertical/horizontal machining
- C-axis rotation continuous for full 5-axis machining
- Expansive tool-storage capacities
- High Speed, High Accuracy, High Rigidity
- Mazatrol Matrix - Standard Equipment
|Capacity||Maximum Workpiece Diameter||2750 mm / 108.270 in||2750 mm / 108.270 in||2750 mm / 108.270 in|
|Maximum Workpiece Height||1750 mm / 68.900 in||1750 mm / 68.900 in||1750 mm / 68.900 in|
|Spindle||Spindle Taper||CAT 50||CAT 50||CAT 50|
|Maximum Speed||10000 rpm||10000 rpm||1000 rpm|
|Motor Output (30 minute rating)||36 kw / 50.0 hp||36 kw / 50.0 hp||36 kw / 50.0 hp|
|Magazine||Number of Tools||30||30||30|
|Rotary Axes||Spindle Tilt (B axis)||200 degrees||200 degrees||200 degrees|
|Table Indexing (C axis)||360.0000 degrees||360.0000 degrees||360.0000 degrees|
|Feed Axes||Travel (X Axis)||4000 mm / 157.00 in||5000 mm / 196.85 in||6000 mm / 236.22 in|
|Travel (Y Axis)||3600 mm / 141.73 in||3600 mm / 141.73 in||3600 mm / 141.73 in|
|Travel (Z Axis)||710 mm / 27.95 in||710 mm / 27.95 in||710 mm / 27.95 in|